Termites are known for their goodness in the ecosystem but also for the destruction they can cause on property. Homeowners whose floors are made of hardwood are mostly the ones who encounter major problems when it comes to termite attack. When a hardwood floor is fixed properly, during fresh construction or when refinishing, it is highly unlikely that you will need termite control services later on. This article provides the physical means of termite control that will help to protect your hardwood floors from damage by termites.
The top step in refinishing hardwood floors involves observing the floor and paying more attention to the gaps between the floor planks. The intention for carrying out the observation is to uncover any pests such as termite control that are known for damaging hardwood floors. You can notify a termite control expert if you find any signs of termites. While observing, you will be able to tell the kind of floor you are working on. While some floors like oak and pine are easier to work with, others, like mahogany and maple are more complex. You should then begin the refinishing process after you are certain that you can refinish your hardwood floor.
Performing an adhesion test if what follows after the above exercise. You will choose the perfect area where you will do the adhesion test from. You should begin by cleaning the area of floor that you are dealing with using a floor cleaner. Sanding the clean area with a sanding screen and removing the extra residue is the next thing that you should do. The dust-free area is then ready for the application of a coat of polyurethane. You can then check on the area after about twenty-four hours. The area where you applied termite control polyurethane coating should be polished apart from the few whiskers caused by dust. You can then know that your floor is ready for recoating when you press down on the coated surface using medium pressure and the polyurethane remains intact.
After the above step, bring together the materials that are essential for termite control your floors. Among the crucial equipment for carrying out floor refinishing are industrial set vacuum cleaner, breathing protection, hearing protection, safety glasses, work gloves, polyurethane floor sealant, painter’s tape, box fan, power floor buffer, nail set, wide-blade dull putty knife, pliers, hammer and edge sander. You can either borrow these items from a neighbor or buy from a home improvement store or online shop.
The steps that follow then include cleaning your floor, buffer it and then add the floor finish. Cleaning helps the floor to come out flawless. You should change the surface of the sanding screen facing the floor after ten to fifteen minutes because after that it will lose its sanding capability. After buffering the floor, you should ensure that you get rid of any dust prior to doing the finish. Polyurethane is among the simplest to use floor finishes.